Launch and Retrieve Boat Latch suits Aluminium Boats
Launch and Retrieve Boat Latch is the original boat latch designed in Australia. Simplify the launch and retrieve process to a single person operation.
- This model is designed for aluminium boats from 3m t0 6.5m.
- Fits boats with a towing eye tab welded to the bow (Normally found on aluminium boats only)
- Easy – Simple – Effective
- No boat modification required (apart from fitting the boat latch)
- Manufactured with marine grade 316 Stainless
Launch Process
- At the waters edge set latch to retrieve position
- Release safety chain and winch cable
- Set the latch lever to the ”release” position
- Reverse the trailer into the water at a depth where the boat cannot yet float off the trailer (usually where the back rollers/sides are approx. 50mm under water). At this depth the latch is holding the front of the boat and there is resistance from the rollers/sides to prevent movement.
- Start the boat’s motor and ease forward slightly (around 20mm) to automatically release the spring;loaded catch
- Reverse or glide off the trailer
Retrieval Process
- Set the latch to the “Retrieve” position
- Reverse the trailer into the water to a similar depth used for launching (as described above).
- Slowly drive the boat on to the trailer to within once metre of the latch
- Allow the boat to settle and slowly drive it forward to engage the latch. The latch will slide over the snare and be securely held.
- Stop the motor and lift the propeller leg.
- Drive the trailer a short distance around 3m) clear of the water. Attach the winch hook to the snare and winch the boat to firmly secure the bow within the V-block or roller.
- Secure safety chains and tie-downs as usual before driving further
- Disengage the latch for road travel.
$335.00